Landscape Lighting Material Checklist for Contractors
Everything You Need Before Starting a Landscape Lighting Installation
Nothing slows down a project faster than missing materials. Professional contractors know that preparation is one of the most important factors in completing landscape lighting installations efficiently and profitably.
Use this checklist before every project to ensure you have the components necessary for a successful installation.
Fixtures
Verify all lighting fixtures are on-site before installation:
- Path lights
- Spotlights
- Uplights
- Well lights
- Hardscape lights
- Specialty fixtures
Always confirm fixture quantities against the approved design plan.
Transformer
Select a transformer with adequate capacity based on total fixture load and future expansion requirements.
Verify:
- Transformer wattage
- Multi-tap options
- Photocell compatibility
- Timer compatibility
Wire
Ensure adequate wire is available for all planned runs.
Recommended options include:
- 12 AWG direct burial wire
- 10 AWG direct burial wire for longer runs
- Extra wire for adjustments and future modifications
Connectors
Common connector types include:
- Waterproof wire connectors
- Gel-filled connectors
- Heat shrink connectors
- Junction boxes when required
Never compromise on connection quality, as poor connections are one of the most common causes of service calls.
Mounting and Installation Supplies
- Ground stakes
- Mounting hardware
- Conduit where necessary
- Cable staples
- Anchors and fasteners
Testing Equipment
Every installation crew should have:
- Digital multimeter
- Voltage tester
- Wire stripper
- Crimping tools
Final Walkthrough Checklist
Before leaving the project:
✓ Verify fixture alignment
✓ Confirm voltage at fixtures
✓ Test timer operation
✓ Test photocell operation
✓ Inspect all connections
✓ Review system operation with the client
A properly prepared contractor can complete installations faster, avoid delays, and reduce costly return visits.